About Barco ClickShare

The Barco ClickShare wireless presentation system allows you to connect a wireless presentation USB dongle to your Windows or Apple laptop device and wirelessly present content to the room’s audio visual system. Your can also present wirelessly from Apple mobile devices via AirPlay, or from android and some mobile Windows PC devices via Miracast.

Power On the AV System

Locate the AV system’s touch panel controller, then select the large POWER ON button to start the AV system.

If the touch panel controller is black or showing a PRESS SCREEN TO ACTIVATE message, first touch the display to activate the touch panel. The AV system may take up to 40 seconds to power on.

Select the ClickShare input

With the AV system powered on, press the Click Share input selection button.

Connecting your device

Connect a ClickShare USB dongle to an available USB port on your laptop device. The device will mount on your device, much in the same way as a USB storage drive.

Browse to the ClickShare drive on your device, then start the ClickShare application: ClickShare_for _Windows or ClickShare_for_Mac. The light on the USB dongle will change from flashing white to static white when the ClickShare system is ready.

Click the button on the ClickShare USB dongle to show your screen on the display. The light on the dongle will be static red while you are sharing your screen. Clicking the button again will remove your screen from the display.

Wireless presentation via AirPlay & Miracast

Connect your AirPlay or Miracast capable device to the ClickShare Wi-Fi network in your room. The name of the network will correspond to the campus, building, and room you are using. You will find the password for the room’s ClickShare Wi-Fi network at the lectern.

PLEASE NOTE: You will not be able to access resources normally limited to UQ’s internal networks, such as Eduroam, when connected to the ClickShare network. If your device does not have a 3G/4G mobile connection (a SIM card), you will not have internet access when connected to the ClickShare network. Please use a ClickShare USB Dongle to avoid this issue on Apple MacBook or Windows PC devices.

Apple iPads and iPhones (iOS 4.2 or higher)

Connect to the CC-BBBB-RRR-clickshare Wi-Fi network, then swipe up from the bottom of your screen to show the quick menu. Select the AirPlay Mirroring option, then select ClickShare from the list of available AirPlay devices.

Apple MacBook (OSX 10.8 or higher)

Connect to the CC-BBBB-RRR-clickshare Wi-Fi network, select the AirPlay icon () at the top right of your screen, then select ClickShare from the list of available airplay devices. If you are unable to use this feature, please use a ClickShare USB dongle, as described above.

Android Devices (4.2 Jelly Bean or higher)

Connect to theCC-BBBB-RRR-clickshare Wi-Fi network, open the Settings app on your device, select Displays, select Cast Screen, then select ClickShare from the list. Please note that this feature may not be available on older android devices. 

Windows PC Devices (Windows 8.1 or higher)

Connect to the CC-BBBB-RRR-clickshare Wi-Fi network, open Settings from the start menu, select Devices, select Connected devices, select Add a device, then select ClickShare from the list. Please note that this feature may not be available on all Windows PC devices. If you are unable to use this feature, please use a ClickShare USB dongle, as described above.